Zhejiang Sote Electric provides one-stop service for stamping die development and design, stamping, and automated assembly. Stamping molds need to be tested before they can be delivered for use.Let’s learn how to try the stamping die and what it contains.
1. The assembled stamping die can be smoothly installed on the designated press;
2. Using the specified material , the qualified stamping parts can be produced stably and smoothly on the die;
3. Check the quality of the stamping parts obtained by the test punching to see if they meet the requirements of the product parts drawings. If the product parts are found to be defective, analyze the reasons and correct and debug the stamping die until a batch of products that fully meet the design requirements can be produced. stamping parts;
4. According to the design requirements, further determine the shape and size of some molds after the test, and trim these sizes until they meet the requirements;
5. After the stamping die test, the basis for the QC department to prepare the process specification for the production of batch stamping parts;
6.When testing the die, various unfavorable factors affecting production, safety, quality and operation should be eliminated, so that the stamping die can achieve the purpose of stable and mass production.
Post time: Jul-26-2022